![]() Also, make sure to select the right Output device in the audio settings. We added it because if you accidentally enable the MIC on the Voice-FX, then a feedback will be created. This means that the radio mixer output will not get included to the final MIX. You should change the destination to None. Setup the Audio Mixer Pipeline which you can find under File -> Configīy default the Voice FX is pipelined to the Mixer. When connected to a computer (Windows or Mac) you will be able to transfer stereo audio to and from the XB-14.ġ) What we will do is to send all audio (DeckA/DeckB/Aux1/SoundFX) from SAM Broadcaster to the Radio Mixer, mix them with our voice from the microphone and then send them back to SAM Broadcaster either for recording through Voice-Tracking or to play-on-Air through the Encoders. The green led above the button will be activated. Setting up the Radio Mixer (Allen & Heath XB-14):ġ) Make sure that ST6 Button is activated. It will give you a quick guide on how to operate the radio mixing desk. However the same principals apply to all USB/FireWire (IEEE 1394) audio/radio mixing desks and to most versions of SAM broadcaster.īefore I start you can have a look at the Allen&Heath XB-14 Quick Operation Manual which we prepared for our students. In our Radio Lab we are using Allen&Heath XB-14 radio mixing desk and SAM Broadcaster PRO (v4.9.8). mp3PRO, Ogg and Windows Media.In this tutorial we will explain to you how to connect a radio mixing desk to SAM Broadcaster PRO . ![]() ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |